M26x0.75 female to M42x1 male thread adapter, cone

• Front side - M26x0.75 female thread
• Rear side - M42x1 male thread

This adapter allows using microscope objectives with M26x0.75 mount thread on cameras with M42 lens mount thread (Zenit, Paktica etc).

Tolerances made quite large intentionally, so this adapter allows using M26x36tpi as well (Mitutoyo thread).

Also, if you have M42 to your camera adapter, you can use microscope objectives with movie cameras, DOF systems and other devices.

This is cone-shaped adapter with 50mm cone height.

Made of anodized aluminium.