OCT-19 lens to Canon EOS camera mount adapter

87% of 100
In stock
Only 5 left
OCT-19 lens to Canon EOS camera mount adapter

This adapter is made to use OCT-19 LOMO cine lenses on Canon EOS cameras and other systems that adopt EF mount.

Distinctive feature is maximizing inner space to allow using as many lens types as possible (even 0.5mm matters there).

Tripod support has two standard screw holes - for 1/4" and 3/8" screws. Well balanced - picture shows the camera with the adapter and OKC6-75-1 lens standing on the leg without any extra support (with other cameras balance may be different, but not too much).

Tested lenses that fit this adapters and focusing to infinity are:

LOMO OKS5-18-1

LOMO OKS3-22-1

LOMO OKS7-28-1

LOMO OKS11-35-1

LOMO OKS6-75-1

Tested camera is Canon EOS 300D only, so I don't know if all elements of other camera will clear the adapter lock ring. It is made with very tiny gap to the camera body where built-in flash is located. Hope other Canon cameras didn't make this place more tight.

More Information
Adapter Front Side OCT-19
Adapter Rear Side Canon EF
Material Aluminium
Manufacturer RafCamera
Write Your Own Review
You're reviewing:OCT-19 lens to Canon EOS camera mount adapter
Your Rating
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Frequently Bought Together