M42x1

The M42 lens mount is a screw thread mounting standard for attaching lenses to 35 mm cameras, primarily single-lens reflex models. It is more accurately known as the M42 × 1 mm standard, which means that it is a metric screw thread of 42 mm diameter and 1 mm thread pitch. It was first used in Zeiss' Contax S of 1949; this East German branch of Zeiss also sold cameras under the Pentacon name; after merger with other East German photographic manufacturers, the name Praktica was used. M42 thread mount cameras first became well known in Japan under the Praktica brand, and thus the M42 mount is known as the Praktica thread mount there. Since there were no proprietary elements to the M42 mount, many other manufacturers used it; this has led to it being called the Universal thread mount or Universal screw mount by many. The M42 mount was popularized in the United States by Pentax; thus, it is also known as the Pentax thread mount, despite the fact that Pentax did not originate it.
The Tamron T2 mount also uses a 42mm thread, but the pitch is finer at 0.75 mm, and the T-mount is further from the film plane. The two lens mounts are not interchangeable, and attempting to mount an M42 lens on a T2 mount — and vice-versa — will damage the thread of both the lens and the mount.

Material from http://en.wikipedia.org/wiki/M42_lens_mount

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Back to top