M42x1 thread lens to OCT-19 camera mount adapter

In stock
Only 3 left

Allows using M42 lenses on camera with OCT-19 mount.

This adapter allows you to use Zenit/Praktica M42 lenses on your Konvas-2M camera. Due to necessity to match flange focal distance, we had to protrude it inside the camera. This causes two problems:

1. This adapter will not fit Kinor-35.

2. Some M42 lenses will not fit it.

I have only three M42 lenses at the moment. All three fit the adapter and focus fine. Focus and aperture rings of Industar-50-2 and Helios-44-2 are accessible. On the Zenitar-M, aperture ring becomes unaccessible since it is located too close to the mount.

You should check dimensions of your lenses before purchase. Depth of the adapter is 19mm, inner diameter is 64mm. Make sure that your lens is thin enough in rear part to fit the adapter. If not, you still can use this adapter with your lens in reverse direction, but you'll be able to use the lens in macro mode only, and aligning of the optical axis may be tricky.

More Information
Adapter Front Side M42x1
Adapter Rear Side OCT-19
Material Aluminium
Manufacturer RafCamera
Write Your Own Review
You're reviewing:M42x1 thread lens to OCT-19 camera mount adapter
Your Rating
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.